CWA Series horizontal lathes
1.Whole bed with side triangle ribs,boxing and slanting combined inside ribs structure to get super rigidity.
2.The spindle box adopted big through bore with high rigidity and wide range speeds driving system,the spindle bore is φ130mm which can perform forced processing.
3.With hydraulic control friction disk brake system,the spindle run steady and safely.
4.The upper too rest can feed automatically and joint the action of carriage to complete processing small taper but .ong cone.
5.Compact operation,convenient use and extermal circulation lubricating lubricating system get good good hot stability.
6.Safeguard and hiding safe system designed very reasonable and fatures with fine environmental protection.
7.The machine can be used widely,its longest center distance can be 12 meters and with beautiful outlook,easy mantenance.
8.There are a lot of functional accessories to be chosen.
| Technical data |
CWA Series horizontal lathes |
| CW62/1 100A |
CW62/1 110A |
CW62/1 125A |
| Bed |
Max swing dia.overbedmm |
1000 |
1100 |
1250 |
| Max swing dia.over cross slide mm |
630 |
730 |
850 |
| Max swing dia.over gap mm |
1240 |
1340 |
1490 |
| Width of bed mm |
600 |
| Max.travel of cross slide mm |
520 |
570 |
| Center distance mm |
1500/3000/4000/5000/6000 |
| Spindie |
Range of spindle speeds(steps)rpm |
8.5-852(forward/reverse 18 steps each) |
| Dia.of spindle bore mm |
φ130 |
| Spindle nose |
A2-15/C15 |
| Inside taper of spindle bore |
Metric140(Metric140-MK6#) |
| Feed |
Range of metric thread mm |
1-240(64Kinds) |
| Range of inch thread n/1 |
30-1/8(64Kinds) |
| Range of module thread πm |
0.5-7.5(32Kinds) |
| Range of pltch thread DP |
60-4 (32Kinds) |
| Range of longitudinal feeds mm/r |
0.1-12 |
| Range of transverse feeds mm/r |
0.05-6 |
| Tool rest |
Max.size of tool bit holder mm*mm |
40*40 |
| Max.travel of top slide mm |
250 |
| Rapid speed in logitudinal direction m/min |
3.74 |
| Rapid speed in transverse direction m/min |
1.87 |
| Rapid speed of top slide m/min |
0.94 |
| Tailstock |
Dia.of tailstock sieeve mm |
140 |
| Max.traval of tailstock sleeve mm |
250 |
| Inside taper of tailstock sleeve mm |
Metric80 |
| Motor |
Power of main motor KW |
15 |
15 |
18.5 |
| Rapid motor KW |
1.5 |
| Coolant pump |
0.125 |
| Load bearing |
Max.workpiece weight |
8000 |
| Package |
machine size&weight |
|
|
| Center Distance mm |
machine size mm |
simple packing size mm |
net weight kg |
| 1500 |
4200*1800*1850 |
4400*2000*2150 |
9000 |
| 3000 |
5600*1800*1850 |
5800*2000*2150 |
10500 |
| 4000 |
6600*1800*1850 |
6800*2000*2150 |
11500 |
| 5000 |
7800*1800*1850 |
7800*2000*2150 |
12500 |
| 6000 |
8600*1800*1850 |
8800*2000*2150 |
13500 | |
Sale Department
*/